Commercial Scupper & Water Heads
Commercial scupper and water heads are important components of any flat roof drainage system. They are used to direct water away from a building’s foundation, walls, and windows in order to protect the structure from water damage and help prevent water from entering the building. Scupper and water heads are usually installed at the roofline of a building, where they can catch and divert water away from the structure
What’s a scupper drain?
Scupper and water heads are designed to fit into a specific opening in the roof or wall of the building. These openings can be cut or designed into the wall or roof as part of the construction process, or they can be purchased as pre-made pieces and installed afterward. The size of the opening will depend on the size and shape of the scupper or water head that is being installed.
What does scupper mean?
When installing a commercial scupper or water head, it is important to ensure that the opening is properly sized and cut. This will ensure that the water will flow freely and not be blocked off or restricted in any way. Additionally, the scupper or water head should be securely mounted and sealed, as this will help to prevent any water leakage.
When it comes to the installation of commercial scupper and water heads, there are several different methods that can be used. One of the most common is the use of fasteners or adhesives. Fasteners are typically used to secure the scupper or water head in place, while adhesives can be used to provide additional waterproofing protection.
Best Use Water heads Scuppers
Another option is to utilize a waterproofing membrane. This type of membrane is designed to provide a barrier between the scupper or water head and the roof or wall of the building. This will prevent any water from entering the structure and causing damage.
In addition to using fasteners or adhesives, it is also important to use a sealant or caulk around the edges of the scupper or water head. This will help to keep water from leaking out and entering the building. Additionally, it will help to keep any pests or rodents from entering the building through the small spaces that can exist around the scupper or water head.
Finally, it is important to inspect the scupper or water head regularly to ensure that it is functioning correctly. This can be done by checking for any signs of damage or wear and tear, such as cracks, chips, or gaps in the material. If any of these are found, it is important to take the necessary steps to repair or replace the scupper or water
A wall scupper is a type of roofing system drainage component that is installed on the wall of a structure. It is designed to allow water to drain off of the roof through a specific opening in the wall, usually near the top of the wall. The water then flows out of the wall through a water head which is usually made of metal or plastic and is attached to the wall with a flange. The water head helps direct the water away from the wall and into a drain or gutter system. The scupper and water head combination help to prevent water from pooling around the base of the wall or damaging the building structure.
what are Scupper & Water Heads
Scupper and water heads are architectural features designed to divert water away from buildings. A scupper is an opening cut into the exterior wall of a building that allows water to drain away. A water head is a sloping cornice or parapet that funnels rainwater away from the building.