Real Denver Pricing • Updated 2026
What Does a Gutter System Actually Cost on a Denver Home?
alt="Gutter Cost Denver 2026 pricing guide by Ernie's Gutter">
Featured Answer
How Much Do Gutters Cost in Denver in 2026?
For a one-story Denver home, Ernie’s Gutter currently prices standard 5-inch seamless gutter at $10.59 per linear foot before job-specific items. Downspouts are $9.77 per linear foot. Removal, corners, outlets, drip edge, fascia work, roof steepness, building height and drainage changes can raise the final total. The house determines the real price.
The Numbers First
Our 2026 Gutter Pricing Reference
Most homeowners searching gutter prices want an actual number, not three paragraphs telling them to call for a quote. These are the working numbers we use as a starting point for normal residential conditions. They are not a promise that every home will land at the same total because two houses with the same square footage can have completely different rooflines, gutter footage and access.
| Item | 2026 Pricing | What It Covers |
|---|---|---|
| 5-inch seamless gutter | $10.59 / linear ft. | Standard one-story installation under normal access and roof-edge conditions. |
| Downspouts | $9.77 / linear ft. | Vertical downspout footage needed to move water from the outlet toward final discharge. |
| End caps, outlets and elbows | $9.77 each | Individual fittings used to close runs, transition water and build the downspout route. |
| Handmade miters | $39 each | Field-built corners where gutter runs meet around the roofline. |
| 1×2 drip edge | +$3.00 / linear ft. | When the roof edge needs added drip-edge work as part of the gutter installation. |
| Existing gutter tear-off | $3.25 / linear ft. | Removal of existing gutter before replacement. |
| Typical haul-away | $150–$200 | Typical disposal range; unusual material volume can change the amount. |
| Two-story work | +20% | Height, ladder movement, safety and production time change the labor. |
| Steep roof 5/12 or greater | +10% | Additional difficulty and roof-edge access on steeper conditions. |
Pricing shown is a practical 2026 reference for Ernie’s Gutter and assumes normal residential conditions unless otherwise stated. Final pricing is based on the measured scope, access and conditions at the property.
Why Online Averages Miss
The Price of a Gutter Job Is Not Based on House Square Footage Alone
If this is your first time hearing this, a 2,000-square-foot house does not automatically have the same gutter footage as another 2,000-square-foot house. One may be a simple rectangle with four corners. The other may have bump-outs, a garage, multiple roof elevations, inside corners, valleys and a long downspout route to reach a safe discharge area. That second house uses more material and more labor even though both homes show the same living-area number on a real-estate listing.
Linear Footage
This is the starting point. We measure the roof edges that actually receive gutter. More footage means more coil, hangers, labor and time.
Stories and Access
A low one-story ranch is not the same installation as a two-story home with limited ladder access, landscaping obstacles or difficult side yards.
Roof Pitch
Steeper roofs change how the crew works safely at the eave. We apply a 10% adjustment at 5/12 pitch and steeper under our current pricing system.
Miters and Corners
Every outside or inside corner takes extra fabrication and sealing. Complicated rooflines can have far more corners than a basic home.
Downspout Layout
The number of outlets, total downspout footage, elbows, extensions and final water path all affect the material and labor required.
Roof-Edge Condition
New gutter needs solid support. Rotten fascia, damaged drip edge or a roof edge that sends water behind the gutter may need correction first.
A Realistic Example
What Could a 150-Foot One-Story Replacement Look Like?
Here is a simple example so you can see how a price develops. This is not a quote for your house. It is an educational example using our current line-item pricing.
alt="Ernie's Gutter contractor installing seamless gutters on a Denver area home"
loading="lazy">
Where Prices Move
Why Two Estimates Can Be Hundreds or Thousands of Dollars Apart
Sometimes one contractor is simply more expensive. But sometimes the two proposals are not pricing the same job at all. One quote may include removal, disposal, new outlets and enough downspouts. Another may leave those items vague or push them into change orders later. One contractor may plan to correct weak fascia before hanging new metal. Another may fasten directly into whatever is there and move on.
When comparing gutter estimates, do not look only at the number at the bottom. Read what the number buys. A lower total is not a bargain if the water still ends up at the foundation or the new system is attached to damaged wood. A higher total is not automatically better either. The scope has to make sense.
Look for These Items in the Scope
- Total gutter footage and gutter size
- Total downspout footage and number of outlets
- Elbows, end caps and corner details
- Removal and disposal of old material
- Drip-edge or fascia work when needed
- Gutter guards if they are part of the project
- Where each downspout will discharge
- Height, access or steep-roof adjustments
Questions Worth Asking Before You Sign
- Are the gutters seamless and formed for my house?
- What size gutter are you installing?
- How many downspouts are included?
- What happens if you find rotten fascia?
- Is removal and haul-away included?
- Are corners handmade or prefabricated?
- How far will the water be moved from the house?
- What is excluded from this price?
Old-School Trade Knowledge
We Learned the Work Before There Were Online Price Calculators
Ernie’s Gutter is a third-generation family contracting business with roots going back to 1978. We learned exterior work the old-fashioned way: measuring houses, bending metal, correcting drainage, replacing rotten fascia, solving leak problems and seeing which details held up after years of Colorado weather.
That matters on a cost page because pricing is not only multiplication. The person measuring the job has to recognize the conditions that can change it. Water pouring from a valley may require another outlet. A long run may need a different downspout strategy. A roof edge can look fine from the driveway and still have fascia soft enough that a new hanger will not hold correctly.
We use written numbers because homeowners deserve to know how the estimate was built. We also use judgment because no calculator can see the house. The combination of measurable line items and practical field experience is how we try to keep a price fair without pretending every job is identical.
Repair Before Replacement
You May Not Need an Entire New Gutter System
One of the easiest ways to make a gutter project expensive is to assume every problem requires full replacement. A leaking corner, loose outlet or short damaged section may be repairable when the remaining system still has good pitch, secure attachment and solid fascia. That is why diagnosis comes before sales.
Replacement makes more sense when problems are widespread: several runs hold water, gutters repeatedly pull away, multiple corners leak, the metal is badly damaged, the system is undersized or the downspout layout cannot handle the roof water. In those cases, repeated repairs can become the expensive option because the underlying layout never changes.
If your main concern is whether the existing system can be saved, start with our gutter repair information. If the system is already beyond practical repair, see our rain gutter replacement guide.
What We Measure
How We Turn a House Into a Written Gutter Estimate
A useful estimate should be understandable after the contractor leaves. We start by measuring the actual runs and then look at the details that change production, material and water control. The point is not to make the estimate complicated. The point is to make it complete enough that you know what you are paying for.
Measure the Runs
We determine the linear footage that actually needs gutter rather than estimating from the home’s square footage.
Map the Water
We identify valleys, large roof planes, outlets, downspouts and where runoff needs to discharge.
Check the Edge
We look at fascia, drip edge, existing attachment points, height, roof pitch and access.
Write the Scope
We price the measurable work and explain additions or conditions that affect the final project.
This approach also helps prevent one of the most frustrating homeowner experiences: getting a low initial number and then discovering that removal, disposal, downspouts, corners or roof-edge work were never included. A written scope should make the important pieces visible before work begins.
Downspouts Matter to the Total
Gutter Price Is Only Half the Water-Control Story
Downspouts are not decorations placed at the end of a gutter run. They are the exits. If there are too few outlets or the downspouts are poorly located, the gutter can hold more water than it should and overflow during fast storms. Adding enough drainage capacity may increase the installation cost, but leaving the system short on drainage can defeat the reason you bought new gutters in the first place.
We also look at where the water ends. A downspout that terminates beside the foundation can move the problem from the roof edge to the ground. Extensions, splash control or other drainage corrections may be needed depending on the property. If this is the part of your system causing trouble, see our downspouts and gutters guide.
Denver homes are especially sensitive to this because winter melt can refreeze on walks and driveways, and summer storms can drop a lot of water in a short time. The cheapest layout is not always the least expensive layout once water damage enters the picture.
alt="Ernie's Gutter QR code for Denver gutter estimates"
loading="lazy">
The Roof Edge Can Change the Price
Why Fascia and Drip Edge Sometimes Show Up on a Gutter Estimate
Gutters need something solid to attach to. If the fascia is soft, split or rotten, new hangers cannot turn failed wood back into good wood. That condition has to be addressed before the new system can be expected to stay secure. The same goes for roof-edge details that allow runoff to travel behind the gutter instead of into it.
This is one of the reasons online calculators can be misleading. They can multiply footage by a national average, but they cannot inspect the wood behind your gutter. They cannot see the stain where water has been getting behind the metal. They cannot tell whether an old spike-and-ferrule system has damaged the fascia or whether added drip edge would improve the roof-to-gutter transition.
When the wood is still sound and the issue is mainly protection and maintenance, fascia wrap can sometimes be part of the roof-edge solution. When the wood is rotten, replacement comes first. Our soffit and fascia wrap page explains that difference in more detail.
What Affordable Actually Means
A Fair Price Is Not the Same Thing as the Cheapest Price
We want our work to be affordable, but affordable does not mean cutting out the parts that make the system work. It means pricing the actual need, keeping good material when it makes sense, avoiding unnecessary replacement and explaining optional upgrades separately from required work.
That is also why we publish real numbers. A homeowner should be able to look at a proposal and understand why a 100-foot one-story job is not priced the same as a 220-foot two-story home with multiple corners, steep roof sections, damaged fascia and long downspout runs. Transparency makes it easier to compare contractors on scope instead of trying to guess what is hiding behind one lump-sum number.
We are not trying to be the company with the biggest sales presentation. We are a family contractor that learned the trade by doing the work. If a repair is the sensible answer, we will talk about repair. If replacement is the better investment, we will explain why. And if the price changes because the house has more work in it, you should be able to see where that change comes from.
Related Reading
Keep Researching Before You Spend the Money
Homeowner Questions
Gutter Cost Denver FAQs
How much are 5-inch seamless gutters per foot in Denver?
Our current 2026 starting price for standard 5-inch seamless gutter on a normal one-story installation is $10.59 per linear foot. The final project also depends on fittings, downspouts, removal, height, roof pitch, fascia condition and other job-specific items.
How much do downspouts cost?
Our current downspout pricing is $9.77 per linear foot. Elbows and outlets are priced separately at $9.77 each. The amount of downspout needed depends on building height, outlet locations and where the water needs to discharge.
How much does it cost to remove old gutters?
Our current tear-off pricing is $3.25 per linear foot, with typical haul-away commonly running about $150 to $200. Unusual material volume or project conditions can change disposal costs.
Why does a two-story gutter job cost more?
Two-story work takes more ladder movement, safety planning and production time. Under our current pricing system, two-story gutter work carries a 20% adjustment compared with the equivalent one-story scope.
Does a steep roof make gutter installation more expensive?
It can. We currently apply a 10% adjustment for roof pitches of 5/12 and steeper because the roof-edge conditions and work access become more difficult.
Are gutter guards included in the basic gutter price?
No. Gutter guards are an upgrade and should be priced separately so you can see the cost of the gutter system itself and decide whether the guard system makes sense for your tree coverage and maintenance needs.
Can fascia repair increase the price?
Yes. New gutters need sound backing. If fascia is rotten, soft or structurally unable to hold the new system, repair or replacement of that material may be required before the gutters are installed.
Is gutter repair cheaper than replacement?
Usually, when the problem is isolated and the remaining system is sound. The better question is whether repair solves the underlying problem. Repeated repairs on a badly pitched or failing system can eventually cost more than correcting it once.
Can you give me an exact gutter price from the square footage of my house?
Not reliably. Living square footage does not tell us the actual gutter footage, number of corners, roof pitch, number of stories, downspout layout or fascia condition. A real measurement produces a much more useful number.
How do I get a written gutter estimate from Ernie’s Gutter?
Call 720 346 ROOF or use the contact link on this page. We can review the property, measure the system and explain which line items are affecting the project cost.
Family Owned Since 1978
Get the Number for Your Home — Not Somebody Else’s Average
Tell us what is happening with the gutters and we will start with the house in front of us. Measure it, inspect it, explain it and price what it actually needs.