ERNIE’S GUTTER · FAMILY OWNED SINCE 1978
Chop and Drop Gutter
Chop and Drop Gutter service gives contractors and prepared homeowners custom-length seamless gutter runs for their own installation. Ernie’s Gutter helps you organize measurements, color choices, fittings, and delivery details before fabrication.
Featured Answer: This service supplies seamless gutter lengths for installation by you or your crew. Start with the printable layout and order worksheets below. List each run, corners, outlets, downspouts, and color, then contact Ernie’s Gutter to review the order. Confirm available sizes, material arrangements, accessories, and delivery or on-site forming before scheduling.
Chop and Drop Gutter
If this is your first time hearing this, Chop and Drop Gutter means the gutter is formed and cut for your project while installation is handled separately. It gives you continuous straight runs instead of assembling numerous short stock sections. It does not automatically include removing old gutters, repairing fascia, attaching hangers, sealing corners, or installing downspouts. Those responsibilities need to be clear before anyone orders material.
Ernie’s Gutter is a third-generation family business serving the Denver area since 1978. Our fabrication-only service gives customers a way to arrange custom gutter material while managing their own installation. The best starting point is a complete drawing and a readable cut list. A few minutes spent labeling the building can prevent expensive confusion when several similar lengths arrive together.
Think of the order as a coordinated package rather than a total number of feet. A house with four straight eaves is different from one with inside corners, bay windows, offset downspouts, and a covered entry. Even when the gutter footage is similar, the fittings can be very different. The worksheets already on this page help you identify those parts before discussing the final scope.
Measured Gutter Lengths
List each straight section separately and identify its position on a sketch. Include units and explain whether a dimension is a field measurement or a requested finished cut length.
Materials and Fittings
Record the requested gutter size, profile, color, downspouts, elbows, outlets, corners, hangers, and end caps. Confirm which items are included in the written order.
Your installation plan
Decide who will receive, support, move, and install the material. Arrange enough people and suitable equipment to handle the longest section without bending it.
Fabrication-only orders can suit contractors with an installation crew and homeowners who already understand gutter work. It is not a promise that every project is suitable for do-it-yourself installation. Long runs, upper stories, fragile roof edges, and difficult access can require equipment and experience beyond basic household tools. If you want measurement and installation handled together, use our full seamless gutter installation service.
Before placing an order, explain the property location and whether you want material delivered or formed at the project. Confirm access, space for fabrication, and the proposed handoff. Do not assume the machine can fit through a narrow driveway or that a long finished run can be transported around every corner. Those practical details belong in the scheduling conversation.
Start With the Printable Gutter Order Form
Open Your Printable Gutter Order Form
If the PDF does not display on your device, open the worksheet PDF directly.
The original two-page PDF in the dropdown above contains a gutter layout guide and an item-and-quantity worksheet. Use the drawing page to show your roofline, then transfer the parts you need to the order sheet. Opening the PDF separately usually provides the clearest way to zoom and print. It is a printable worksheet, not an online order submission or a fillable checkout form.
Current contact: Use Ernie’s Gutter Contact Us or call 720 346 ROOF. The original PDF shows an older phone number. Its example dimensions, quantities, downspout rules, hanger spacing, and material listings are planning references; confirm the actual requirements for your project before fabrication or installation.
Draw the building before totaling material
Label each gutter run with a letter or a simple location such as front entry, garage, or rear patio. Mark inside and outside corners so the drawing shows how sections meet. Identify where each run ends and where each downspout belongs. If two elevations are different, note that difference instead of drawing everything as one continuous level line.
Keep measurements readable and use one consistent format. Write feet and inches explicitly rather than leaving an unexplained decimal. Show roof-edge obstructions, unusual angles, and any connection to existing gutter. Photograph those locations from the ground when possible. Where a measurement cannot be obtained safely, tell us what is missing instead of guessing and treating that guess as a fabrication instruction.
Separate field measurements from cutting instructions
The original guide includes an example cutting allowance. Do not apply that allowance automatically to every section. Finished length depends on the corner method, end condition, and how the installer plans to join the components. Identify who is responsible for final dimensions and ask what allowance, if any, should be included. The approved cut list should be unambiguous before material is run through the machine.
Choose the Gutter, Fittings, and Color Together
Chop and Drop Gutter service includes options for 5-inch and 6-inch aluminum gutters. Confirm the size, available profile, finish, and material before finalizing your order. A nominal size does not identify every detail of a gutter cross-section, and fittings intended for one profile may not fit another. If matching an existing system, supply clear photos and measurements rather than relying on the appearance of its front face.
Confirm Your Coil Options
Tell us whether you need material supplied or want to discuss using coil you already own. Customer-supplied coil must be reviewed for machine compatibility, width, thickness, condition, and finish before it is accepted for a particular order. Do not purchase coil on the assumption that any roll will work. Confirm the arrangement, responsibility for material, and any separate charges before scheduling fabrication.
Count outlets and downspout components
An outlet is the opening and fitting that connects the gutter to the downspout. Elbows route the downspout around the roof overhang or another obstruction. A downspout strap supports the vertical pipe. Those components are different items, and their sizes need to work together. The worksheet helps identify them, but the finished order should state actual quantities rather than assume a standard kit fits every building.
Include inside corners, outside corners, end caps, hangers, sealant, extensions, and any roof-edge flashing the installation requires. Confirm who will cut outlet openings and assemble corners. A straight-cut gutter run is not the same as a fully assembled gutter system. Having that distinction in writing helps the receiving crew understand which fabrication steps remain before the material can be installed.
Choose Your Gutter Color
Use the original color chart to begin your selection, then confirm current colors and material availability before ordering. Screen brightness and printing can change how a finish appears. A physical sample is a better basis for matching siding, fascia, and existing metal. Specify downspout color if it will differ from the gutter color.
View Gutter Color Options
Keep commercial profiles separate
A larger commercial box gutter is a separate profile decision, not an automatic substitute for a residential gutter on this worksheet. If the project needs that system, review our seamless box gutter information. Confirm the actual cross-section, outlet fit, metal, supports, and production arrangements for the commercial order. For water routing beyond the gutter, see downspouts and gutters.
Plan the Fabrication Visit and Handoff
The material order and the installation plan should agree before the production visit is scheduled. Tell us the longest run, property access restrictions, and where the finished sections can be supported. A long gutter can twist or crease if handled poorly. Arrange a clean receiving area and a clear path that does not require dragging material across rough ground, squeezing it between obstructions, or leaving it unsupported.
Approve Your Final Measurements
Your crew should have one final cut list with a revision that everyone recognizes. Confirm the order before production begins, especially if different people measured the building and requested the material. Small verbal changes can be lost when multiple runs look similar. Where possible, label the drawing and cut list the same way so the delivered section can be matched to its intended location.
Confirm the sequence of work
- Prepare the layout: Mark runs, corners, outlets, downspout routes, color, and access conditions.
- Review the order: Confirm dimensions, profile, material arrangements, fittings, and the limits of the fabrication service.
- Arrange production and handoff: Confirm delivery or on-site forming, safe access, receiving help, and material support.
- Receive the material: Compare the sections and accessories with the approved order before moving them into storage or installation.
- Complete installation separately: The installer handles appropriate backing, attachment, alignment, connections, and final drainage checks unless otherwise agreed.
New gutter material cannot correct deteriorated fascia on its own. Fascia is the roof-edge board or mounting surface behind the gutter. If it is soft or damaged, the installer must address suitable backing before attaching the replacement system. Likewise, a correctly cut run still needs planned pitch and compatible outlets. Fabrication accuracy and installation quality are related, but neither replaces the other.
Follow product-specific installation instructions rather than treating the worksheet as a universal engineering guide. Roof area, concentrated runoff, attachment conditions, and discharge locations vary between buildings. Do not assume one downspout serves a fixed number of gutter feet on every house. The installer needs to consider the water entering the system and the capacity available at each outlet.
At handoff, review any discrepancies promptly and keep your order documents. Do not cut or modify a questionable section before clarifying what was supplied. Agree in advance how measurement changes, additional fittings, and return visits are handled. Those details can affect the total cost even when the original gutter footage appears straightforward.
Prepare a Complete Chop and Drop Gutter Request
To request service, send a readable copy of your layout and item list when contacting Ernie’s Gutter. Include the project address, your contact information, the person receiving the material, and any scheduling restrictions. Use the current contact page rather than the older telephone number printed inside the worksheet. Discuss the submission method before assuming that printing or completing the form places an order automatically.
Understand What Changes the Price
Chop and Drop Gutter pricing depends on the actual order. Gutter footage, profile, material, color, fitting quantities, fabrication arrangements, travel, access, and handling requirements can affect the quote. Do not compare a material-only price with a complete installation price as though they cover the same work. Confirm any minimum order, production charge, delivery charge, or separate material cost when requesting your quote.
Availability and timing should be agreed for the specific project. A published worksheet is not a promise that every accessory, finish, or gutter size is in stock. Likewise, fabrication may need coordination with your crew or job-site access. Order early enough to review missing details, but do not remove functioning gutters solely because you have downloaded the form or started a price inquiry.
Include these details in your request
- A labeled drawing and a separate length for every straight run.
- Requested gutter size, profile, material, and color.
- Inside and outside corners, outlets, end caps, hangers, and sealant quantities.
- Downspout sizes, lengths, elbows, straps, and discharge accessories.
- The proposed material supply arrangement and production location.
- Access conditions, receiving crew, and whether installation help is needed.
When storm damage is involved
If this material order relates to storm damage, retain photos of the existing gutters and any contractor documentation before removal. A material order alone does not establish insurance coverage or document the condition of the whole system. Request any inspection or documentation service separately so the scope is clear. Coverage and payment decisions remain with the insurer.
Scope note: Chop and Drop Gutter supplies the material and fabrication specifically agreed in writing. Installation, measurement responsibility, drainage design, repairs, delivery arrangements, accessory inclusion, and any warranty terms must be confirmed for the order. The original worksheets are planning aids, not a guarantee of current stock or a substitute for project-specific installation requirements.
Chop and Drop Gutter material still needs a complete drainage plan. The U.S. Department of Energy’s Building America guidance on gutters and downspouts explains why roof runoff should be directed away from the building. Use it as background alongside product instructions and the conditions at your property.
Helpful Homeowner Resources
Use the worksheet for organizing your material request and these service pages for related installation and drainage questions.
Chop and Drop Gutter Questions
What is Chop and Drop Gutter service?
Chop and Drop Gutter provides seamless gutter lengths for installation by you or your crew. The written order should identify fabrication, material, fittings, and the agreed handoff. Removal, repairs, attachment, sealing, and downspout installation are separate unless specifically included.
Where can I get the printable order form?
Use the original two-page PDF linked in the worksheet section above. It contains a layout guide and an item-and-quantity sheet. You can open it separately to save or print. Contact Ernie’s Gutter to review the completed information; downloading it does not place an order.
Is the PDF an online fillable order form?
No. The existing PDF is a printable worksheet rather than an interactive checkout or fillable online form. Print it to organize the layout and quantities, then confirm how to submit the information and approve the final order.
Who supplies the gutter measurements?
Discuss measurement responsibility before ordering. If you or your installer supply the dimensions, identify each run and distinguish field measurements from requested finished cut lengths. Confirm corner allowances and any required verification before fabrication starts.
Are 5-inch and 6-inch gutters available?
Chop and Drop Gutter service includes options for 5-inch and 6-inch aluminum gutters. Confirm the available size, profile, finish, and material for your order before scheduling. Commercial box gutter requirements need their own profile and production review.
Can I supply my own gutter coil?
Discuss customer-supplied coil before buying or bringing material. Acceptance depends on reviewing compatibility, width, thickness, condition, and the production arrangement. Confirm whether your order uses supplied material or an approved customer-provided roll.
Do you bring the gutter machine to the job site?
On-site gutter forming can be arranged with Ernie’s Gutter. Confirm on-site forming for your project, including machine access, working space, the longest run, receiving help, and any scheduling or travel charges before booking.
Are downspouts, hangers, and corners included?
Only the items agreed in the written order should be treated as included. List downspouts, elbows, outlets, corners, end caps, hangers, sealant, and other accessories separately. Confirm sizes and quantities instead of assuming every order contains a complete installation kit.
Can I use the original color chart to choose my finish?
Use the chart as a starting reference and confirm current availability before ordering. Screens and printers can change color appearance. Request a physical sample when matching existing exterior materials, and specify gutter and downspout colors separately if needed.
How do I request Chop and Drop Gutter service?
Use Ernie’s Gutter’s Contact Us page or call 720 346 ROOF. Have your drawing, lengths, fitting list, color preference, project location, and installation plan ready. Confirm the final scope and schedule before treating the request as an accepted order.
Protection Starts At The Top Of The Home
Disclaimer
Information on this page is provided for general education and project planning. Actual gutter sizes, material availability, fabrication methods, attachment, outlet placement, downspout capacity, and drainage requirements depend on the property, product specifications, and applicable requirements. The original worksheets are reference materials and may show older contact details or product information. Confirm all measurements, quantities, scope, pricing, delivery arrangements, and warranty terms with Ernie’s Gutter before approving an order. Chop and Drop Gutter does not include installation or repairs unless specifically agreed in writing. Insurance coverage and claim decisions remain with the insurance carrier.